Triumph Gold Reports Results from Drilling of the Nucleus Au-Ag-Cu Deposit, Freegold Mountain Property, Yukon Territory
VANCOUVER, British Columbia, Nov. 07, 2018 (GLOBE NEWSWIRE) -- Triumph Gold Corp., (TSX-V: TIG) (OTCMKTS: TIGCF) (“Triumph Gold” or the “Company”) is pleased to announce the results from 4,159 metres of diamond drilling, in twenty-one holes, conducted in the Nucleus gold, silver, copper (Au-Ag-Cu) deposit area. Highlights of the 2018 Nucleus drill program include:
- Four high-grade gold intersections:
-- 19.8 grams per tonne (g/t) gold (Au) over 0.84 metres*** (m) in N18-06 (39.62 – 40.46m)
-- 15.93 g/t Au over 1.00 metre*** in N18-17 (150.00 – 151.00m)
-- 13.67 g/t Au over 1.67 metres*** in N18-04 (28.51 – 30.18m)
-- 9.13 g/t Au over 2.00 metres*** in N18-16 (106.00 – 108.00m)
- Mineralized intervals from sixteen of the twenty-one holes drilled in 2018 returned gold grades that exceed the average grade (0.544 g/t Au) of the current inferred mineral resources estimated in December 2014*. Examples include:
-- 1.196 g/t Au over 45.19 metres*** in N18-08 (19.81 – 65.00m)
-- 1.184 g/t Au over 59.50 metres*** in N18-17 (149.00 – 208.50m)
Highlighted intersections are noted below in Table 1, a full list of significant intersections is contained in Table 2, and the location and orientation of the drill holes are listed in Table 3 and displayed on Figure 1.
|Table 1 – Highlighted results from 2018 Diamond Drilling at the Nucleus Au-Ag-Cu Deposit|
The 2018 drill program at Nucleus was designed to optimize a future pit-constrained estimate of mineral resources by targeting:
- Near-surface mineralized areas that had insufficient drill density to support estimates of mineral resources.
- Near-surface mineralized areas where additional delineation drilling could facilitate upgrading of Inferred mineral resources to an Indicated category.
- Areas prospective for high-grade mineralization.
Triumph Gold Corp. has contracted SIM Geological Inc. to provide updated estimates of mineral resources for the Nucleus, Revenue and Tinta deposits, to be completed in 2019. All three deposits are located on Triumph Gold’s 100% owned, road accessible, two hundred square kilometre Freegold Mountain property, Yukon Territory. The updated resource estimate at Nucleus will incorporate all drill results prior to 2014, the results from sixteen holes completed in 2017 (press release PR18-01, dated January 18, 2018), as well as 4,159 metres of diamond drilling, in twenty one holes, conducted in 2018 (as described in this news release).
|Table 2 Significant Results from 2018 Diamond Drilling at the Nucleus Au-Ag-Cu deposit
|N18-11||No Significant Results|
|Table 3 Location and Orientation of Nucleus Drill Holes, 2018|
* Campbell, J., Sexton, A., Armitage, A., Studd, D., (effective date December 15, 2014, publication date February 28, 2015): Technical Report on The Freegold Mountain Project, Yukon Canada, Resource Estimates. 43-101Techincal Report. www.sedar.com
** Coordinates are given in North American Datum 83 (NAD83), Zone 8.
*** Length/interval refer to drill hole intercept. True widths have not been determined.
Methods and Qualified Person
Drill core samples ranged between 1 and 2 metres length and were cut at Triumph’s core logging facility on the Freegold Mountain Property. The samples were analyzed by SGS Canada of Vancouver, British Columbia. They were prepared for analysis according to SGS method PRP89: each sample was crushed to 75% passing 2mm and a 250g split was pulverized to better than 85% passing 75 micron mesh. Gold was tested by fire assay with atomic absorption finish on a 30g nominal sample (method GE FAA313), and samples that tested over 10 g/t Au were retested using a 30g nominal sample and gravimetric analysis (method GO FAG303). An additional 35 elements were tested by ICP-AES using a four-acid digestion (method GE ICP40B), over limit samples for copper were retested using the same technique but with assay grade four acid digestion and a higher range of detection (method GA AAS42S). Quality assurance and control (QAQC) is maintained at the lab through rigorous use of internal standards, blanks and duplicates. An additional QAQC program was administered by Triumph Gold: at minimum three quality control samples, consisting of blanks, certified reference standards and duplicates, were blindly inserted into each 75 sample batch. QAQC samples that return unacceptable values trigger investigations into the results and reanalyses of the samples that were tested in the batch with the failed QAQC sample.
The technical content of this news release has been reviewed and approved by Tony Barresi, Ph.D., P.Geo., VP Exploration for the company, and qualified person as defined by National Instrument 43-101.
About Triumph Gold Corp.
Triumph Gold Corp. is a growth oriented Canadian-based precious metals exploration and development company. Triumph Gold Corp. is focused on creating value through the advancement of the district scale Freegold Mountain project in Yukon. For maps and more information, please visit our website www.triumphgoldcorp.com
On behalf of the Board of Directors
Signed "Paul Reynolds"
Paul Reynolds, President & CEO
|For further information please contact:
John Anderson, Executive Chairman
Triumph Gold Corp.
IR Pro Communications Inc.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors - including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities - that could cause actual results to differ materially from the Company's expectations are disclosed in the Company's documents filed from time to time on SEDAR (see www.sedar.com). Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.